SAE J518 code 62 Flange Clamps with Tapped Metric hole

Product Details

Instruction for code 62 Flange Clamps one piece type:

1.Working pressureof SAE code 62 series flange clamps is 42 MPa (420 bar).

2.SAE Flange clamps dimensionsis according to ISO 6162-2:2012. ISO Nominal Size: DN 13; DN 19; DN 25; DN 32; DN 38; DN 51; DN 64; DN 76; DN 89; DN 102; DN 127; Inch size: 1/2"；3/4"；1"；1 1/4"；1 1/2"；2"；2 1/2"；3".

3.Material of SAE flange clamp is made of carbon steel C45, Stainless steel 304, 316 or 316L.

4.The external surface Corrosion protectionof all carbon steel flange clamps,shall be protected with an appropriate coating to pass a minimum 72-h salt spray test in accordance with ISO 9227.

5.Test requirement for pressure/temperature: Flange type connections conforming to this part of ISO 6162 shall be subjected to the burst and cyclic endurance tests specified in ISO 19879 to verify that they meet the specified pressure/temperature requirements.    

6.Designation ofone piece flange clamps connections

One-piece flange clamp size DN 25, with tapped metric hole:  Clamp ISO 6162-2, FCM×25

Swintool company use FS-16WM(dash size)W: SAE 6000 psi flange clamps size 1” inch metric tapped hole .

Parker company use FUSM6x(2,3,4,5,6,8, etc) and FCC (dash size FCCT2 )

Stauff company use BM-Gx(1,2,3,4,5,6,7,8,9,10,11)

Assembled flange connection with one-piece flange clamp (FC or FCM)

SAE Flange Clamps ISO 6162-2 FS

6000 Psi-SERIES CAPTIVE WITH 4-BLOT HOLES / THREAD HOLES

FS-xxWM

Stauff SAE Flange Clamp Metric Holes no. BM-G                                      FL-xxWU with Inch screw UNF thread