What are the differences between ratchet wrenches?


The ratchet socket wrench is connected by the main torx […]

The ratchet socket wrench is connected by the main torx sleeve and the slave torx sleeve of different specifications and sizes through the female key and the male key of the hinged key. Because a quincunx sleeve has two specifications of quincunx-shaped through holes.

The movable trigger can easily adjust the use angle of the wrench. This kind of wrench is used for the tightening operation of screws, and has the characteristics of strong applicability, convenient use and low cost. 

Ratchet Wrenches Tools for sale

The difference is that the torque of the torque wrench can be set.Torque wrench-also called torque wrench or torque wrench. Torque is the product of force and distance. When tightening screws, bolts, nuts and other threaded fasteners, it is necessary to control the applied torque to ensure that the threads are tightened without excessive torque. The thread is broken, so use a torque wrench to operate. First set an upper limit of the required torque value. When the applied torque reaches the set value, the wrench will make a "click" sound or the wrench connection will bend a little angle, which means that it has been tightened and no more force is required.

The principle of a torque wrench (torque wrench) making a click sound is very simple, and it can be understood in the following steps:
1. After the torque wrench makes a "click" sound, it indicates that the torque value you requested has been reached;
2. The "Kata" issued by the torque wrench is produced by its internal torque release structure, which is composed of three structures: pressure spring, torque release joint, and torque ejector.

The principle of kata sound

First, set the required torque value on the torque wrench (the spring is sleeved on the top rod to apply pressure to the torque release joint), lock the torque wrench, and start tightening the bolts. When the bolt reaches the torque value (when the torsion force is greater than the pressure of the spring), there will be an instant disjoint effect. At the moment when the disjointed effect is produced, the joints are knocked, and the metal shell of the wrench makes a "click" sound. This confirms the reminder function of reaching the torque value (in fact, it is the same as the principle that our arm joints will be bent at 15 degrees and placed in the iron pipe to straighten the steel pipe immediately).